Polyurethane Screed
Polyurethane screeds offer greater resistance against acids and fats than epoxy screeds .....
More information
Epoxy Screed
Epoxy resin screeds provides a heavy duty wear and impact resistant seamless.... More information
Epoxy/Polyurethane Coatings
Provide a quickly installed, hygienic surface...... More information
Decorative Screeds
To produce a wide range of floor finishes where image is important...... More information
Industrial Flooring Products.
In today’s industry, improvements in Health and Safety standards increasingly require durable, low maintenance easily cleanable floors. Whether you need to improve safety in the workplace by means of anti-slip surfaces, colour coded areas etc, or you need oil, chemical or acid resistant floors, resin floors provide a durable and effective solution.
We are an approved applicator of several leading manufacturers within the industry, using highly experienced applicators backed by our advisory service. We provide a total project management system approach, starting with a free survey incorporating effective solutions, specification, free test panels or trial areas to determine the right specification to overcome your problem.
Flooring Types, Description, Uses and Thickness.
Do you know what type of floor coating is needed? If not then below is a quick list of types. For more information contact one of our specialists via the contact page. This list shows the different floor types available in accordance with the FeRFA Guidelines and the British Standard BS 8024-6
Type |
Name |
Description |
Duty |
Typical |
| 1 | Floor Seal |
Applied in two or more coats. Generally solvent or water borne. |
LD |
Up to 150um |
| 2 | Floor Coating |
Applied in two or more coats |
LD/MD |
150um to |
| 3 | High Build |
Applied in two or more coats. |
MD |
300um to |
| 4 | Multi-Layer |
Aggregate dressed systems based on multiple layers of floor coatings or flow-applied floorings, often described as ‘sandwich’ systems. |
MD/HD |
2mm |
| 5 | Flow Applied Flooring |
Often referred to as ‘self-smoothing’ or self-levelling’ flooring and having a smooth surface |
MD/HD |
2mm to 3mm |
| 6 | Resin Screed Flooring |
Trowel finished, heavily filled systems, generally incorporating a surface seal coat to minimize porosity |
MD/HD |
4mm |
| 7 | Heavy Duty Flowable Flooring |
Having a smooth surface |
HD/VHD |
4mm to 6mm |
| 8 | Heavy Duty Resin Flooring |
Trowel finished, aggregate filled systems effectively impervious throughout their thickness.` |
VHD |
6mm |
LD = Light Duty (e.g. Dust Proofing and Sealing of Concrete), MD = Medium Duty (e.g. Warehousing, Light Assembly) HD = Heavy Duty (Clean Areas with Mechanical Loading, Dry Production Areas) VHD = Very Heavy Duty (e.g. Chemical Processing, Food Processing, Engineering)
